Rusting is a painting cycle that makes the product really rust, the surface is really covered with rust, with all its nuances of color.
Our rust effect varnish contains miniaturized and superficially passivated iron which is oxidized directly on the painted surface in order to obtain a rust effect completely real.
Depending on the application it is possible to obtain a more or less homogeneous rust surface. The result depends in particular on the method of application of the oxidizing solution. To get the maximum aged effect on real vertical surface, is possible to apply the reactive forming falling drops along the surface, in this way you get the effect of "rust leaching," such as for the ferrous artefacts left to bad weather for many years.
The result is obtained through the chemical oxidation of the varnish and using protective high technology varnished in order to produce artefacts with high resistance.
Goods painted with this product can be used for internal or external, depending on this will be indicated the transparent protective more suitable.
For industrial and artisanal applications of artefacts pose (eg.: gates, windows, stairs, mezzanine, etc....) you can also use a roller or a brush.
Although the rust effect varnish is not been studied for bodywork, stabilizing the rust with the appropriate blocker, formulated by us, is possible to varnish cars, motorcycles and other vehicles for outdoor.
The transparent recommended by us for outdoor application on rust surface it is very opaque compared to the opaque transparent for bodywork, in this case, however, you should use the opaque transparent for bodywork to increase the scratch and the gasoline resistance.
The product does not respond to the Directive 42/2004/CE (VOC values) then can be used with the limitations provided only.
The colors on screen are indicative only. The product is available in two versions: normal rust and rust clear, for the uses for which the rust is considered too grim.
In order to permit evaluation of the effect and for small surfaces a test kit of the product is available, for information please do not hesitate to contact us.
The rust effect can be layed by the use of a primer on:
- metal (iron, aluminium, brass etc ...)
- plastics (ABS, ABS-PC, etc ...)
- for application on the wall is available a water based cycle, please contact us for more information.
If you have any other question feel free to ask us, by the form or at firstname.lastname@example.org
Administrative and productive base:
LAINATE, Via Milano 21, Italy
Postal code: 20020